The FE900 is a powerful, standalone alarm receiver that will receive alarms in most communication formats formats on up to 32 PSTN lines. The FE900 builds upon the foundation of reliability and dependability of its predecessor, the FE100.

• Fully Featured Hardware

  • Two inbuilt Ethernet ports
  • Two isolated RS232 ports
  • Supports up to 32 PSTN lines simultaneously
  • Non-volatile 30,000 event buffer
  • Hot swappable, auto-configuring cards
  • Speaks all the main communications formats
  • Line Cards feature advanced DSP, 8kV isolation and three stage
  lightning/transient protection
  • Optional redundant processor card

• Reliable alarm communications under the harshest conditions

  The FE900 features DSP based noise reduction, granular parameter configuration, and unprecedented debugging features which mean that the FE900 can make sense of alarms sent over harsh and noisy networks and even some non protocol compliant alarm panels
  

• Multiple Receiver Configuration Software

  What sets the FE900 further apart from its competitors is the configuration and management software tool that ships with the FE900. The client/server design of the FE900 software allows operators to configure, monitor and manage receivers remotely from any point of an IP network. For instance, an authorised operator can zoom to any Line Card on any FE900 in their system and interact with it. From one location (or indeed many locations), operators can manage FE900 receivers that are spread all around the globe.
  
  

• Huge Range of Supported Formats

  Pulse Formats
  • 10pps, 20pps or 40pps auto detected
  • All combinations of 1.4kHz / 2.3kHz handshakes and 1.8kHz / 1.9kHz data tones auto detected
  • Hex reporting digits auto supported in any pulse format
  3 Digit Client Code
  • 1 report digit, dual round verification
  • 1 report digit, checksum verification
  • 2 report digits (expanded), dual round verification
  • 2 report digits (expanded), checksum verification
  4 Digit Client Code
  • 1 report digit, dual round verification
  • 1 report digit, checksum verification
  • 2 report digits (expanded), dual round verification
  • 2 report digits (expanded), checksum verification
  • 2 report digits (4 + 2 pulsed), dual round verification
  • 2 report digits (4 + 2 pulsed), checksum verification
  DTMF Formats
  • 4 + 2 DTMF, dual round verification
  • 4 + 2 DTMF, checksum verification Ademco
  • 4 + 2 Express
  • Ademco Fast
  • Ademco Fast Extended
  • Ademco Contact ID
  • Inner Range IRFast DTMF with CRC
  Modem Formats
  • Inner Range IRFast,
  • SIA
  • Additional Formats New communications formats are constantly being added to the FE900. These are periodically released in firmware updates.